Q: My family and I recently moved into a small, older home connected to our local water and sewer utilities. I was very surprised to see our first water and sewer bills, and now realize we have to start conserving. Can you please give us a checklist of water-saving suggestions that we can follow?
— Don, Pennsylvania
A: In many areas, the sewer bill for a home may be estimated by the amount of water that passes through the water meter. So, high water bills may also create high sewer bills. If this is the case, by conserving water you may be able to bring down the costs of both your water and sewer expenses.
Most Read Stories
With that in mind, here are five of my favorite tips to conserve water:
1. If your home has older toilets that use more than 1.6 GPF (gallons per flush), or if you have weak-flushing toilets, upgrade to new “HET” (high efficiency toilets) that use only 1.28 GPF. Quality HET’s have been redesigned to deliver high-performance flushing.
2. Fix dripping faucets and water lines. Little drips here and there can add up and turn into big water wasters.
3. Upgrade to a new high-performance showerhead that uses 1.75 gallons per minute.
4. Run the dishwasher when it’s completely full, and when doing laundry use the correct water settings for lighter loads.
5. Change the aerators on your present faucets to low-flow aerators. That’s an easy and inexpensive water-saving project.
Bottom line: In many cases, some little changes to your lifestyle can make big changes to your water and sewer bills.
Master Contractor/Plumber Ed Del Grande is known internationally as the author of the book “Ed Del Grande’s House Call” the host of TV and Internet shows, and a LEED green associate. Visit eddelgrande.com or write email@example.com. Always consult local contractors and codes. Sorry, no personal replies.