Q: We have an old water-guzzling toilet with a low-profile toilet tank that needs to be replaced.
Since we have a built-in shelf just above the tank lid, we need to install a new toilet with a very short tank as well.
I’ve heard that the new water-saving low-profile toilets lack flushing power because of the short tank and the reduced amount of water. Can you please address this issue?
A: A toilet is one of the most used plumbing fixtures in a home.
- Husky guide on UW cheerleading tryouts goes global
- CEO makes fiery emails about Muslims part of the workday
- Look like this, not that: UW pulls cheerleader-tryout advice after angry backlash
- Oh smack: Garbage truck hits Alaskan Way Viaduct
- Seahawks get high grades for drafting of Jarran Reed, while reaction to other picks a little more varied
Most Read Stories
Switching over to a high-efficiency toilet, or HET for short, is one of the easiest ways to save a lot of water.
New HETs have been redesigned to flush with increased power, but use less than 1.3 gallons per flush.
The extra HET flushing power can come from taller toilet tanks that generate more “head pressure” for a faster flush, or “assisted flushing systems” can also be used to make less water flush with more power.
If you’re looking for a water-saving low-profile toilet, I would look for one that operates with the new “pressure vessel” technology.
Pressure vessel flushing systems store air pressure and water inside a closed vessel located under the toilet tank lid. When this type of toilet is flushed, the compressed air pressure helps deliver the extra flushing power wanted for a HET.
Master contractor/plumber Ed Del Grande is known internationally as the author of the book “Ed Del Grande’s House Call,” the host of TV and Internet shows, and a LEED green associate. For more information, visit eddelgrande.com.