Take a good look at this Virginia house. Modern lines, wide-open floor plan, sky-high windows — almost always the hallmarks of a contemporary...
Take a good look at this Virginia house. Modern lines, wide-open floor plan, sky-high windows — almost always the hallmarks of a contemporary, architect-designed residence that’s nice to look at and undoubtedly pleasant to live in but manifestly out of reach for most people.
Now read these next words very slowly and let them sink in: The house cost the homeowners $95,000.
OK, OK. That’s not including the price of the land, 6.2 acres on a heavily wooded hill near Amherst, Va., just off the Blue Ridge Parkway. And labor costs were minimal because the homeowners built much of the dwelling themselves, with the aid of family and friends.
- Turkey’s president, Putin hurl insults after plane downed
- Teen, one of 14 siblings, finally gets to be a kid
- Apple Cup Game Center: UW Huskies dominate No. 20 Cougars, shut down WSU's offense in Seattle
- Seattle sushi fans, rejoice: Shiro's new place is open
- 2015 Apple Cup might be the start of something big for UW, WSU
Most Read Stories
But Barry Bless and Jennifer Watson figure that even if contractors had done most of the work, their 1,150-square-foot, two-bedroom, one-bath mountain retreat would have come in around $150,000. That works out to about $130 a square foot, compared with the $200- to $400-a-square-foot cost of many modern, architect-designed houses.
Bless, 50, a musician and househusband, and Watson, 38, a photographer, are pioneers. The Richmond, Va., couple are the first customers to have bought and put up the LV Home, a sleek-lined prefabricated dwelling by architect Rocio Romero that sells as a kit for roughly $30,000 and travels on the back of a truck.
To learn more about the prefab designs of architect Rocio Romero, visit www.rocioromero.com.
The FlatPak, designed by architect Charlie Lazor, is featured in the April/May issue of Dwell magazine and can be viewed at www.flatpakhouse.com.
Wieler, a new company that will be developing modern prefab homes near Chapel Hill, N.C., can be found at www.wieler.com or by calling 800-496-7987.
Other prefab Other prefab resources can be found at www.fabprefab.com.
Jennifer Watson and Barry Bless have christened their new modern prefab dwelling Luminhaus and have opened up the Amherst, Va., house for vacation rental. For rates and availability, go to www.luminhaus.com or call 804-233-0526.
Such is the promise of modern prefab, an architectural trend championed in cutting-edge design magazines such as Dwell and breathlessly promoted on such Web sites as www.fabprefab.com and others. The concept is more than a style, more than a method and something like a movement, one that after years of hope and expectation is gaining real momentum.
The fundamental idea is a simple one and around since double-wide trailers started rolling off assembly lines after World War II. Making parts of a house in a factory maximizes efficiency and significantly contains costs.
Wall panels, roofs, exterior framing and other elements can be shipped and built on a foundation. Just add windows, electricity, plumbing and other systems, and voilà: You’ve got yourself a house, for a whole lot less money than a stick-built home.
Bless and Watson first laid eyes on their new house in “Prefab,” a coffee-table book published in 2002 and co-written by Allison Arieff, Dwell’s editor-in-chief, and Bryan Burkhart. Bless had given the book, regarded by many as having sparked the modern prefab movement, to his wife as a Christmas present.
When Watson saw images of the LV Home prototype and learned Romero planned to mass-produce it, she was determined that she, Bless and their four daughters would eventually live in one.
The couple were particularly suited to take on the project because both are experienced carpenters. Most people would need to call in a general contractor to lay the foundation, put up the wall panels, install windows, put in electrical/HVAC/plumbing systems and otherwise fabricate a house in which only the exterior envelope can truly be said to be “prefabricated.”
“Everyone has that dream of it all just snapping together like Legos,” Romero said. “But the more permanent a building is going to be, the more complex it is. I tell all my clients to get a general contractor.”
For decades the word “prefab,” and indeed the very notion of a factory-built house, carried a host of unflattering connotations: inferior, unimaginative, temporary.
But proponents of modern prefab see the factory as a crucial component of a system that allows people of relatively modest means to live in architecturally distinct houses that typically have been available to the few with enough money to pay for them.
The chief roadblock to modern prefab construction has been reluctance among housing manufacturers, averse to taking a risk on an unproven phenomenon.
Small band of backers
Although believers in modern prefab are passionate, their numbers are tiny. Until manufacturers are convinced a tenable market exists, they will be wary of jumping on board.
“The technology exists, and the motivation on the part of consumers and designers exists,” Arieff said. “Financing is becoming easier. Many obstacles have been taken out of the way.
“But until a large-scale builder or developer commits to this in at least a few regions, it’s not going to become what people are dreaming of. We have to move beyond where we are now, which is a bunch of very committed individuals or small firms who are trying to do this. Alliances need to be formed on a bigger level.”
Nathan Wieler surely would agree. He and his wife just moved in to what is arguably the most high-profile modern prefab house in America: the 2,260-square-foot Dwell Home in Pittsboro, N.C., so named because that magazine sponsored its construction in a contest in 2003.
The deadline for the Dwell Home’s completion was July 10, when the public was invited to come out and take a look. The open house that day was expected to draw 500 people. Five times that many showed up, some from Michigan, California and Oregon.
Budgeted at $87 a square foot, the Dwell Home’s seven basic modules were factory-built, shipped to the site and erected in a matter of weeks. The house shone like prefab’s holy grail — evidence that the vectors of efficiency, economy and modernist aesthetics had finally converged.
Which they had, mostly.
As recently as two weeks ago, though, Wieler and his wife were still awaiting the certificate of occupancy that would allow them to move in to their celebrated home.
The holdup had nothing to do with the basic integrity of the prefabricated portions of the house. But a million little things — mainly cosmetic issues that had arisen from the house’s hasty assembly — required a million little fixes.
As a result, says Wieler, the final cost per square foot of his home rose appreciably, just as his move-in date stretched on.
At this stage of its development, at least, prefab doesn’t mean perfect.
“Anytime you try to be the first to do something, you experience all sorts of bumps in the road,” says Wieler, who with his wife selected a design by Resolution:4 Architecture, one of more than a dozen entries in the Dwell Home competition.
“We had all those experiences,” he said. “We’re trying to get to where you can actually market and sell these fabulous houses that are quick to build and affordable. But in terms of doing the first one, it’s not necessarily so quick and affordable.”
When Wieler, 32, uses the pronoun “we,” he’s not just speaking on behalf of prefab believers.
The former Internet company CEO is parlaying his personal experience with the Dwell Home into a new startup. It’s a real-estate development firm that will try to achieve what Arieff says is most needed for the prefab revolution to catch fire: a full-service package entailing design, manufacturing, engineering and land purchase.
The new company draws inspiration, says its founder, from mid-century California housing developer Joseph Eichler, whose patronage of great architects helped make him the rare real-estate tycoon beloved by the design community.
Wieler’s new project “leverages the advantages of prefabricated construction,” according to its mission statement, in its goal of providing customers with the modern house of their dreams.
Arieff, meanwhile, is partnering with Minneapolis architect Charlie Lazor on a plan to mass-produce his remarkable — and, at $140 a square foot, remarkably cost-effective — FlatPak house, which her magazine notes “just might be the project that revolutionizes the prefab industry.”
And in Missouri, Romero continues to make her LV House (and its big sister, the two-level LVL House) for a growing client base. She has all but stopped accepting custom-built commissions, preferring instead to devote herself to the cause full time.
“There are still naysayers; there’s still skepticism,” she said. “Some people on the live-chat forums are still critical. But the people who have been through it want to spread the word and show people that it really does work. And as people learn more, there are going to be more ‘yea’-sayers than naysayers.”